V4 Grupp2 setup

Forum / Övrigt / SSR / V4 Grupp2 setup

  • Författare
    Inlägg
    • november 23, 2009 kl. 17:39 #21148

      Hej V4:a-fans!

      I am wondering if we could collect some data about what engine-setup you have in your grupp2-cars (V4:a).
      I am thinking about carburettor (förgaser) and sparkplugs (tändstift).

      I start with the setup I had in my V4 before the engine-rebuilt:

      1740ccm (91mm-pistons), single-echaust heads (enkelblas), 42/37 Valves, Saab S&R-Crossflow-manifold (Korsinsug) with 2xWeber 45DCOE, long distributor (fördelar).

      Sparkplugs was NGK BP7ES.

      Carburettor-setup:

      Idle-Jet/Tomgangsmunstycke 50 F9
      Mainjet/Huvudmunstcyke 140
      Air-corrector jet/Emulsionmunstycke 200
      Accelerationsmunstycke 50
      Choke/Halsring 36mm
      Venturi/Spridare 4.5
      Emulsion-TubeEmulsionstub F11

      I have had the engine rebuilt after some broken pistons, now with 1760ccm (91.5mm pistons) and dubbelblas-heads with 43/38mm valves. This one needs to be set up, what I will have done soon -> will post the setup then.

      Would be interesting to see what you are driving in your grupp2 V4s! 🙂

      MVH,
      Erik

        november 24, 2009 kl. 09:31 #148488

        Noone? :confused:

          november 26, 2009 kl. 23:14 #148660

          Är jag förvånad över mängden svar?? NÄÄÄÄÄÄ

          Erik, du har pm

            november 27, 2009 kl. 06:15 #148663

            I dont know what´s in my weber 45.s, sorry, but I am not the right man to answer your questiones, I cant anything about how to adjustthese carburators. But I have a friend who is very well knowing, but mostly for volvos and opels.

              november 27, 2009 kl. 07:08 #148664

              Only thing I know about my carburators is that I have Halsring 36mm & Mainjet 150 or 155
              But that engine is on 1815cc

              A Friend has an 92mm engine &he has 140 in mainjets & 36mm halsringar but he put in this jets when his exhaust was smashed. When it was fixed he burned a piston directly so he thinks that he needs bigger jets. It was A new engine with better flow in exhaust he told me.

              My expirience is that V4 runs best on 36mm halsring. 38mm makes it more slower to rev. Maybe morepower on the top but less on lower Rpm.

              /Fredrik

                november 27, 2009 kl. 21:21 #148701

                Hello.
                I think this is my setup:

                Idle-Jet/Tomgangsmunstycke 60 F8
                Mainjet/Huvudmunstcyke 145
                Air-corrector jet/Emulsionmunstycke 190
                Accelerationsmunstycke 50
                Choke/Halsring 38mm
                Venturi/Spridare 4.5
                Emulsion-TubeEmulsionstub F9

                Need more testing-time to work better.

                This is on my 1815 (93mm) engine. Dubbelblås-heads 42/37mm. The car is a street-car, just for fun.

                /Gustav

                  november 28, 2009 kl. 15:09 #148747

                  Hej!

                  At first, thanks for your input! 🙂

                  I have tried now with 38mm halsring, and it is like Fredrik says: it doesn’t rev as good as with 36mm -> so I will go back to 36mm.

                  The rest I will get set up by a specialist on the rolling road test-bank and will post the final results then.
                  But the data I have collected with your help is all going in the same direction and is a good start for me before going to the specialist.

                  Tack!

                  MVH,
                  Erik

                • Du måste vara inloggad för att svara på detta ämne.