Isåkningens baksidor
- Detta ämne har 12 svar, 9 deltagare, och uppdaterades senast 2010-02-05 08:05 av
turbo killer.
-
FörfattareInlägg
-
februari 3, 2010 kl. 21:37 #21598
Så här gick det för mig för två helger sen.
Det verkar som att en original 900i inte tål att ligga konstant på 6-6500varv varje helg i tre vintrar och utan något oljebyte 😀
Hoppsan! Ser ut som en typisk övervarvning… Fick byta kam/kambrygga samt ett antal tryckare på min brors 900i8 efter en jättebra idé som han fick när han tatt sig nån för mkt: Undrar hur mkt Saaben kan varva..?
En tryckare var helt borta, men den uppenbarade sig dock i form av fragment när vi bytte olja… 🙂februari 3, 2010 kl. 22:35 #152550Krister K wrote:Fick byta kam/kambrygga samt ett antal tryckare på min brors 900i8 efter en jättebra idé som han fick när han tatt sig nån för mkt: Undrar hur mkt Saaben kan varva..?Jo men man måste ju testa gränserna i bland.
Jag måste säga att h-motorn är ta mej tusan inte lätt att ta död på, de tål mer än man tror, jag har inte bytt olja på tre vintrar och ändå så ryker BARA en tryckare efter all övervarvning.
Sen vet jag inte hur länge oljan gått innan jag fick bilen, den har säkert gått en bra bit.
februari 4, 2010 kl. 07:54 #152557Trevligt,det ska göras ordentligt. haru fått ihop den än? tänkte köra till helgen kanske.
Faktiskt så kan man ha för många saabar. Det är sanning det 🙂
februari 4, 2010 kl. 08:45 #152561soulmannen wrote:Fast jag antar att det har varit värt det 🙂svar: ja!
Jag tänkte försöka sätta i hop det sista idag.
februari 4, 2010 kl. 10:39 #152565Sorry to hear about you engine damage 🙁
Maybe i can share my experience of this engine….
From my experience and the experience of others, 6000rpm with the standard valve train on the ’H’ series head is probably your highest safe limit, with the occasional limit of around 6300 for short periods.
I arrived at this figure not only from experiences but also on the advice from a professional race engine builder.
More on my engine here http://forum.saabklubben.nu/ubbthreads.php?ubb=showflat&Main=21226&Number=122634#Post122634As a side note, the other engine part that can ’explode’ on the ’H’ engine is the oil pump, the two early pumps are not very good at sustained high rpm’s, the first pump, with two flat segments for the drive and the second pump with one drive lobe, the later pump with three drive lobes is the one you should use.
The standard valve train parts of the ’H’ and ’B’ series engines are very heavy, not really surprising as the original concept of these engines was developed by the Scania truck division!
The valves and buckets are way too heavy;
carb exhaust valve = 92g (pt number 836229).
carb exhaust valve = 78g (pt number 84689).
inj/turbo exhaust valve = 74g.
Inlet valve 42mm diameter = 94g.
bucket = 96g.On my ultra big valve ’B’ series head the vlave train weight has been reduced by around 20% even though the actual valve size diameters are larger!
46mm inlet vlaves and 36mm exhaust valves.
These valves have been specially designed by Puma Race Engines;


The original Saab bucket has been replaced by a Puegeot 205 bucket;

When using the Peugeot bucket lash caps need to be used to adjust the clearance, ordinary Saab shims cannot be used.februari 4, 2010 kl. 14:33 #152567look nice David,…205 peugeot bucket have we use in sweden a while and they works fine,,
volvo b21-23 valves works well to..i think some thread here in talk about that,
all the best Åkefebruari 5, 2010 kl. 08:05 #152621Is that a ’worn’ depression in that bucket/ What engine is that from?
I can only find reference to 44mm volvo valves, are they also available in 46mm ?
-
FörfattareInlägg
- Du måste vara inloggad för att svara på detta ämne.
