Race-track wheels for the 96
- Detta ämne har 51 svar, 16 deltagare, och uppdaterades senast 2009-01-16 19:23 av
Molte.
-
FörfattareInlägg
-
Fuling: Was out in the garage looking for a 13″ wheel, found a steel one, and had a look at the 15″ rim on my car, ET=39. It is the newer rim with rectangular holes, not sure if the older one with round holes is different.
I will try get the car in the garage and see if the 13″ rim slides over the disc and calipers. Would there be a difference in the inner diameter of an alloy rim v. steel.
Hmm mycket möligt nyare har ET39, dessa fäljar är 4,5″ breda.
De älder är 4″ ET 45.
Stämmer innom samma bollplank
ET 45 -39 –> 6mm utå
Om breddning 4,5″-4″ ->0,5″–>12,7mm lika deling ut och in –> 12,7/2–>6,35mm
6+6,35->12,12,35mm ca lika med spårviddsändringen 1220 till 1240mmAluminium fäljar behöver mer material så innerdiamtern i fäljer BORDE bli mindre.
Men men inget att ge sig fa… på.http://www.revolutionwheels.com/4-spoke-modular/
Kanske dessa fälgarna kan vara något? Finns både 13″ och 15″ på sidan. Lite för breda kanske? Finns säkert en hel del begagnat i Tyskland då de är vanliga på Polo och Golf där.MVH
'- 9-3 Aero 2,8T XWD TX Edition, Hirsch Performance -10
- 9000 CC 2,3 Turbo 16 Sport -91 när det är sommar
- 96 GL V4 Super -79 när vägen svänger
- 90 T16 -87 när jag ska överraskaFuling: I found a 13″ wheel in my garage and did some checking on it, from rough measuring there is about 3mm clearance from the caliper, but this will depend on the shape of the rim, this one was from a Ford and was 280mm Ø behind the bolt plat and 320mm Ø at the edge of the rim. As for turning the wheel and having enough clearance in the wheel house, this didn’t seem to be a problem. But to be sure the only thing to do is test fit the wheels and check everything. Bit of an expensive test to buy the wheels without knowing, will think about it a bit more.
From the information I could find they raced the V4 in 1971 with 1500 and 1700 engines. Initially I will be using the standard engine with some light triming, my budget when I start working on the engine will decide what I can do but I don’t think it will be engouh to build an engine that will require replacing the brakes.
Magnus: Thanks for the link, nice rims, even their standard 4 spoke wheels are nice. Will try and find a way of searching the second hand market in Germany, anyone got suggestions.
Gary, please check out http://mocomp.se/
They are located 5km from me. They are involved in rallying and have lots of good stuff.Andreas – Thanks for the link. I had a look at their wheels and they have Compomotive ML wheels in 13×8, that would be a nice wheel for the race replica. Pricing isn’t too bad, 1550 plus moms per wheel, out of my budget but worth keeping notes on.
It will be interesting to see if the price of second hand ronal style wheels for the V4 come down in price, 2250 (ink moms) for a new wheel from Mocomp will make people think twice about paying 10-12.000 for a set of 4 used wheels.
Kolla på http://www.ebay.de där kan du hitta en hel del hjul i de dimensionerna. Söka på:
Revolution wheels
RSL Motoersport
ATS Classic Sternfelgen
Smoor FelgenDunlop SP 2000 kan nog vara ett däck som passar till de här fälgarna.
'- 9-3 Aero 2,8T XWD TX Edition, Hirsch Performance -10
- 9000 CC 2,3 Turbo 16 Sport -91 när det är sommar
- 96 GL V4 Super -79 när vägen svänger
- 90 T16 -87 när jag ska överraska -
FörfattareInlägg
- Du måste vara inloggad för att svara på detta ämne.
